PLAS CEMENT (Epoxy Compound Resin) X-1617

Product Name
X-1617 Set (Resin 22lbs. & Hardner 8.8lbs.)
Appearance:
Beige putty like
Application
General Design Model
Pot Life
120 minutes 23degree centigrade/500g
Demold Time
10 hours 23 degree centigrade
Density:
0.41 g/cm3 (27 lbs/ft)
Hardness:
42 (Shore D)
Flexural Strength:
13 (Mpa)
Coefficient of thermal expansion:
28 x 10    (1/K)

Top

Home , What's New , Products ( ToolingMaterials , Industrial Clay , Tools , Tapes , Film&Sheet , Equipment&Accessory , Stationery) , Contact Us

POLYURETHAN FOAM BOARD

Item# Size Color Density
W100-G 2000mm x 1000mm x 300mm
(80" x 40" x 12")		 Gray 10
W100-W White
Corporation

HOME >> PRODUCTS >> TOOLING MATERIALS

-Rapid bonding adhesive

CYANON D-60

Color : Light Yellow
Hardness (Shore D) : 60
Viscosity @ 25℃　: 2500mPa・S
Setting Time @ 23℃　: 1 minute
Durability (N/mm2)　: Density 16 (same as SANMODUR SS) :　> 1.2
Density 28 (same as SANMODUR MS) :　> 2.9
Density 47 (same as SANMODUR TW) :　> 3.9

* Density = density of tooling board

A modified acrylate reactive adhesive that hardens at room temperature.
A two-component adhesive, consisting of a base resin and hardener, it enhances work efficiently with quick hardening.

　 NC-501 Excellent for Tooling Board, Shore D50-85
　　Color A : Yellow, B : Mullberry
　　Hardness Shore D55
　Setting Time
@23℃　 		Density 16 (same as SANMODUR SS) : 20 min
Density 28 (same as SANMODUR MS) : 5 min
Density 47 (same as SANMODUR TW) : 5 min
Durability
(N/mm2)		 Density 16 (same as SANMODUR SS) : >1.2
Density 28 (same as SANMODUR MS) : >2.9
Density 47 (same as SANMODUR TW) : >3.9
- Toughened Acrylic Adhesive

PEGALOCK NC-501 and NC-700

　NC-700 Excellent for Tooling Board, Shore D12-45
　Color A : Yellow, B : Violet
　Hardness Shore D15
　Setting Time 5℃ : 18min, 　23℃ : 3 min, 　40℃ : 2 min
Product Name Size
PEGALOCK 　NC-501
(Component A & B)		 　200g Set (A:100g, B:100g)
　2kg Set (A:1kg, B:1kg)
PEGALOCK 　NC-700
(Component A & B)		 　200g Set (A:100g, B:100g)
　2kg Set (A:1kg, B:1kg)